I have the English instructions. Adjustment If the engine stalls or the valve is leaking air, adjustment may be necessary. Loosen the 6mm nut on the back of the SSBV and turn the bolt clockwise to further close the valve, counterclockwise to open it. After adjustment, tighten the 6mm nut to secure the bolt. If the nut is not tight, air leakage may occur.

Jun 04, 2003 Just got my HKS Super Sequential Blow Off Valve but the installation manual is all in Japanese. Does anyone have this manual in English at all or know a. Betrapped Full Version.

Turn the bolt only enough to stop the air leak. If turned too much, valve reaction will be compromised. Damn, someone better give me a tree for typing that out. Quote: OUR ANSWER: A leak in a SSQV or an I/C pipe will limit the amount of boost pressure and should have nothing to do with the engine RPM level. If the valve is leaking, adjust the bolt on the back of the valve (1/8 of a turn at a time) clockwise and check that the o-ring is seated properly and c-clip is has the flat side facing down. Do not take the SSQV apart; it will void any type of warranty. How To Install Trapcode Form In After Effects Cs6. If there is problem, send it in through the dealer it was purchased from.